What should I do when water enters the indoor LED display screen? Without further ado! Now follow the method to solve it immediately, but if your LED display screen has been in the air box for more than 72 hours, then the next things may not be of much use to you, because the screen is basically not repaired Worth it. Therefore, when the display screen body enters water, it must be dealt with in time!
Step 1 Dry the LED display screen that has entered the water, and it must be completely dry.
Step 2 The LED display screen is energized and aged, and the operation and debugging are carried out by the following steps:
(1) Brightness 10 percent , power on for 8-12 hours
(2) 30 percent brightness, 12 hours power on
(3) Brightness 60 percent , power on for 12-24 hours
(4) Brightness 80 percent , power on for 12-24 hours
(5) Brightness 100 percent , power on for 8-12 hours
After completing the above steps, it can basically return to normal.
【Notice】
(1) Facing the problem of water ingress into the LED display screen, it must be dealt with in time
(2) If the water ingress situation is not dealt with in time, the stability of the display screen will decrease
(3) Do not put the flooded LED display screen into the air box, it will easily cause the LED etc. to break
【Summarize】
Regarding the water ingress situation of the indoor LED display screen, the general sentence is that it must be dealt with in time!
