Some small details of the usual operation method of the Led LCD screen are as follows:
1. Do not allow water to enter the Led LCD screen and metal products that are easily conductive are more flammable to avoid fires and short-circuit failures of the facility.
2. In case of extreme weather such as strong typhoon, lightning strikes, etc., the LCD screen should be cut off and the switching power supply should be cut off. When the weather conditions return to normal, then there is no problem to open the Led LCD screen.
3. It is actually wrong for many people to like to open the Led LCD screen when turning on the computer. The correct way to open the video is to first open the control computer and wait for it to work without problems before opening the Led LCD screen. When closing it should also be closed first. Close the computer after the Led LCD screen.
4. If there is a water ingress condition on the Led LCD screen, be sure to cut off the power before proceeding to the associated maintenance personnel to avoid a short-circuit failure of the screen. After the maintenance is successful, wait until the inside is dry before turning on the operation method to avoid unnecessary losses.
5. If there is a problem with the wiring in the Led LCD screen, please immediately associate the maintenance personnel with the method of operation.
6. Even when the LED screen is infrequently operated, it must be turned on at least once a month. In case of returning to Nantian, it must be turned on at least once a week, and the time period should be at least about two hours.
7. Lift up in summer or before the weather conditions rise to check whether the dehumidification equipment in the screen can be opened without any problem. Operation methods, such as exhaust fans, air conditioners, etc., to avoid heat pipe heat dissipation problems, which may cause the motherboard to burn out due to high temperature. Chip or processor.
8. The computer and related facilities that connect and control the LED screen should be placed in an environment with better ventilation and heat pipe heat dissipation and less dust accumulation, in order to ensure the more stable operation of the Led LCD screen.
9. More cleaning of the Led display: When the Led module is not equipped with a kit, it must be cleaned with special cleaning water. First use this special washing water to gradually apply a little on the Led module. Be very careful: do not add a lot at a time and then gradually process it with a soft brush. This can also speed up the dissolution and peeling of rosin, and it has a good effect on removing dust and residue.
