1. When using an industrial tablet computer, do not open too many browsing windows at once, which may result in insufficient resources and cause crashes.
2. If possible, install a UPS to prevent the computer from crashing after a power failure.
3. When the application software does not end normally, do not turn off the power, otherwise the system files will be damaged or lost, causing the industrial tablet computer to automatically start or crash during operation. For systems such as Windows98/2000/NT, this is very important.
4. During the installation of the application software, if a prompt dialog box "Whether to overwrite the file" appears, it is best to choose not to overwrite. Because usually the current system file is good, you cannot decide to overwrite the file based on the time sequence (unless you care about the time of the file).
5. Do not overclock the CPU, graphics card and other accessories. Pay attention to the temperature. Otherwise, it will restart or crash inexplicably during startup or operation.
6. The BIOS settings should be appropriate. Although it is recommended to set the BIOS to excellent, the so-called excellent is not good. Sometimes the optimal settings may cause startup or crashes.
7. When loading certain software, pay attention to the sequence. Because some software programming is not standardized, it cannot be queued during operation, but must be run later, so as not to cause confusion in system management.
8. When replacing the industrial tablet computer accessories, be sure to plug them in, because poor contact of the accessories will cause the system to crash.
9. When uninstalling the software, do not delete the shared files, because some shared files may be used by the system or other programs. Once these files are deleted, the application software will not start and crash, or the industrial tablet computer system will crash.
10. Do not use floppy disks and CDs of unknown origin. For the software attached to the E-mail, check it with anti-virus software such as 360 and Rising before using it to avoid system crashes after infection.
11. For system files or important files, it is best to use implicit attributes, so that these files will not be deleted or overwritten by mistakes.
12. Try not to run 16-bit applications in Windows 95/98, because 16-bit applications will conflict with 32-bit applications in Windows, causing crashes or failure to start.
13. Use the beta version of the software sparingly, because the beta version is not stable enough in some respects, and the system cannot be started after use.
14. In the case of small memory (such as 4MB-16MB), it is best not to run applications that take up a large amount of memory, otherwise it is easy to crash during operation. It is recommended to save the files currently in use when running these programs.
15. When setting up the hardware device, check whether there is a reserved interrupt number (IRQ). Do not let other devices use the interrupt number, otherwise it will cause IRQ conflicts and cause the system to crash.
16. When modifying the master boot record of the hard disk, the original record should be saved first to prevent the original master boot record of the hard disk from being unable to be restored due to the failure of the modification.
17. It is best to equip a stabilized power supply to avoid crashes caused by voltage instability.
18. When performing disk defragmentation, do not run large-scale application software, otherwise it will cause a crash.
19. Before upgrading the BIOS, you should determine the BIOS version you are upgrading, and you should save the original version first, so as to avoid upgrade errors and make the system unable to boot.
20. When turning off the industrial tablet, do not directly use the power button in the chassis, because using the power button directly will cause the loss of files and make it impossible to start normally next time, causing the system to crash.
21. When running large-scale application software (such as OFFICE 2000), do not exit the previously running program in the running state, otherwise it will cause the entire system to crash.
22. Installing too many operating systems on the same hard disk will cause the industrial tablet computer system to crash.
23. Try not to use pirated software, because there are a lot of viruses hidden in these software. Once executed, it will automatically modify your system and cause the system to crash during operation.
24. During the hard disk check with anti-virus software, do not run other applications on the industrial tablet to prevent the system from crashing.
25. A large amount of dust may be stored in the industrial panel computer case. If the dust touches the circuit of the accessory, the system will become unstable or crash.

